We have been busy working on our project at Elmsett. Here you can see what happens to timber frame when the wrong products are applied - in this case, strong sand and cement.

Strong sand and cement may be a short term fix, but in the long term they dry oiut and cause the frane to decay and absorb moisture, which can then create a habitat for beetles. Some of the mortar will also likely fall out which looks unsightly. At this point, there is usually no option but to remove some of the timber so that it can be inspected by a specialist in traditional building techniques, so that a plan can be made on how to repair or replace the timber.

So far, we have stripped off the strong sand and cement, and removed the concrete slabs. These were too high and were causing bridging damp. Our next steps on this property will be to rebuild the brick plinth with imperial reds and install a slate damp course. We will then replace all the soleplate and oak upright beams with green oak. After that we will install 100mm sheep's wool inbetween the new upright timbers for insulation. Savolit boards will then be fixed to the structure, and then finally, two coats of lime plaster will be applied. We will keep you posted on our progress!

We are really pleased to be abkle to show you our latest progress on our new build property in Newton Green. Plastering is now complete.

We have also started on the footings for the triple cart lodge and garage.

We are making good progress on our farmhouse renovation at Elmsett. Check out our Social Media for a video showing the front elevation. We will be installing new soleplates, brickwork and oak framework. We are currently propping up the structure and underpinning.

We have started another new job in Newton this week. We are putting in a new en suite, dressing room and making a few other alterations.

The Hardi backer boarding in the en suite is now ready for tiling.

This week we have started a new job at Elmsett. We are renovating a large period property. We've begun by starting to remove the sand and cement render, and exposed the perished timbers and soleplates.

The brickwork and dot and dab at Leavenheath is done. Dot and dab is also known as a drylined wall. This is where plasterboard is attached to brickwork using dabs of adhesive or wooden battens. This creates a small gap between the plasterboard and the brickwork. It has the advantage of being quick, simple and economical, and can make the wall more durable without formation of cracks. 

We have also almost completed the first fix of plumbing and electrics. Plastering and windows next!

Progress is coming along nicely at Leavenheath. The plasterboarding has been done, a new bespoke stable door has been installed and first fix of electrics and plumbing has been completed. We have also put in oak collars and plates, and brickwork and lintels have been installed. 

The patio and pathway at Nayland are now complete. We are going to be working on the outbuildings next, so watch this space!

Here's the latest on our Leavenheath job - we have overhauled the existing drains and installed soakaways. We have also cleaned the site and installed a new oil line.

We have started a new job in Nayland this week. We are laying a new patio as well as overhauling the outbuildings.